Importing Dip Data
Strayos provides an option to its users to enter actual hole depths and angles as Dip Data. This can be imported from CSV, or manually entered, and then reported. To do so, select Dip Data under Drill Design, Loading, and Timing:
From here, users can upload their data or plug in the values manually:
Once the values are entered, the Dip Sheets provided appear as shown below:
It is important to note, that this will not change the lengths of the designed bore holes in the drill design.
Related Articles
Importing Dip Data
Strayos provides an option to its users to enter actual hole depths and angles as Dip Data. This can be imported from CSV, or manually entered, and then reported. To do so, select Dip Data under Drill Design, Loading, and Timing: From here, users can ...Importing and Exporting Data from AutoCAD (Autodesk)
Users who are using Autodesk CAD products (C3D) in parallel with Strayos can import and export data through the import and export commands within CAD. To Import: Select the "Insert" tab on the upper toolbar, and select "import". This will open up a ...What common points should be remember during drone image uploading?
Please keep the following points in mind when uploading data: Do not close your laptop or computer screen during image uploading. Avoid pressing the back button until the upload process is complete. If you need to upload new data, open a new browser ...Creating Shot Reports from Truck Data
When utilizing truck data for product usage within a blast, importing the truck information into Strayos only takes a few clicks. To start, the user will want to create a virtual model workspace and navigate to the Drill Design Module to upload the ...Creating Shot Reports from Truck Data
When utilizing truck data for product usage within a blast, importing the truck information into Strayos only takes a few clicks. To start, the user will want to create a virtual model workspace and navigate to the Drill Design Module to upload the ...