How to Change Site Coordinate System Within Projects
When creating a site within Strayos, users must select a coordinate system to reference.
This can later be changed within the projects of the site if needed. To change the CRS:
Select the blue box on the bottom left-hand corner of the coordinate status bar:
In the pop up box, select the CRS which you would like to use:
Strayos supports global CRS, EPSG codes, and local projections. If you need assistance finding your EPSG code, reference this article here.
Related Articles
Moving Projects from Site to Site - JSON Download
If users are ever looking to move a project from site to site, or download a .json file, here are the steps to do so: 1.) Download Project .json file: click on the options button (three dots) next to project name, and select download. You will then ...Placing Ground Control Points (GCP) in the site
How to use ground control point markers Ground Control Points, or GCPs, are marked points on the ground that have a known geographic location. In aerial mapping, a drone can be used to collect imagery of the site. What qualifies as good GCP marker? ...Creating Virtual Model Projects
Strayos offers the option to create drill and blast plans in a 2D virtual space versus uploading Drone imagery or pre-processed data. To start, in the site creation page, either create a new site or within an existing site, chose the Virtual Model ...Creating Virtual Model Projects
Strayos offers the option to create drill and blast plans in a 2D virtual space versus uploading Drone imagery or pre-processed data. To start, in the site creation page, either create a new site or within an existing site, chose the Virtual Model ...How to Change Fragmentation Measurement Settings
Strayos offers several ways to customize Rock Colors and Rock Diameter Calculations in the fragmentation module. Users can choose between these settings in their site settings, pictured below. Once the settings are enabled, it will be used for new ...