How to Change Fragmentation Measurement Settings

How to Change Fragmentation Measurement Settings

Strayos offers several ways to customize Rock Colors and Rock Diameter Calculations in the fragmentation module. Users can choose between these settings in their site settings, pictured below. Once the settings are enabled, it will be used for new projects.

1.) Select the site settings



2.) Navigate to Fragmentation: 




3.) Choose from the Rock Size Colors for Relative DXX or Absolute Size Ranges: 


4.) Choose how Strayos measures the rock diameter: 


Make sure to save your site settings. New settings will be applied to newly processed photogrammetry projects. 

    • Related Articles

    • Fragmentation Prediction

      Overview Strayos provides you the most accurate fragmentation predictions possible by automatically calibrating them using previous blasts. The prediction models continually learn and improve as you use the Fragmentation Prediction and Fragmentation ...

    • User Account Settings - Editing Decimal Places for Measurement Types

      Set Decimal Place Counts for Volume in Strayos 1. Navigate to the Units settings 2. Click "Edit decimal place counts" 3. Click Measurement Types and then "add" 4. Choose "Measurement Type" 5. Choose the type from the drop down 6. Choose unit ...

    • Fragmentation QA QC

      Introduction Strayos’ Fragmentation AI is a powerful tool that leverages deep learning to analyze muckpile images, providing accurate rock size distributions and blast performance insights for mining operations. This Quality Assurance/Quality Control ...

    • Measurement Offset Tool

      Strayos allows its users to offset measurements within projects by a specified distance entered by a user. To utilize this function, follow the steps below: 1.) After drawing a measurement on the model, right-click on the measurement to display the ...

    • 3D Shot Volume Measurement

      Design the drill pattern Set up the drill pattern using your preferred method. Note: Ensure subdrill and floor elevations are set correctly as shot volume will exclude subdrill You may need to enter a backbreak value > 0 when setting up the AB line. ...