How to Upload Pre-processed Data

Possible Combinations of Preprocessed data:

• To create a 3D model, you will need a digital elevation model (DEM - DSM or DTM) and an orthophoto GeoTIFF file.
  
• The DEM and Orthophoto must be attached to a Coordinate Reference System (CRS) and in the same CRS as the site you are uploading to.

AI Features are available in the pre processed dataset after the data is processed.

STEP 1 

Choose Upload Pre-Processed Data 

STEP 2

Select the  option Upload Preprocessed data or Upload Lidar LAS File

 

STEP 3

Choose Site and Title Project 

STEP 4 

Upload the appropriate file types. For 3D surfaces, upload applicable DSM and DTM. 

 

STEP 5 : Review and Submit

 

 

• Related Articles

• Uploading Measure While Drilling Data

  To upload MWD data in Strayos, follow the steps below: Navigate to the MWD module in Strayos > Smart Drill Analystics: Manage MWD Files: Select Add: First, upload the Drill Plan file: Ensure the columns are correct, and a metric EPSG code is ...

• What common points should be remember during drone image uploading?

  Please keep the following points in mind when uploading data: Do not close your laptop or computer screen during image uploading. Avoid pressing the back button until the upload process is complete. If you need to upload new data, open a new browser ...

• Steps to upload and process Klau PPK data in Strayos platform

  Before we upload Klau PPK data in Strayos, lets first understand the best practices of collecting PPK data. How data should look like Images Make extra images BEFORE and AFTER the flight. These images should be synced with PPK events. In whole ...

• How to link post blast project with pre blast project?

  There are two ways to link the pre-blast with post-blast data. A. Before uploading post-blast images 1. Before uploading post-blast data in the software, need to toggle on the post-blast Fragmentation and Muckpile AI tab. 2. Select the Pre-blast ...

• Creating Virtual Model Projects

  Strayos offers the option to create drill and blast plans in a 2D virtual space versus uploading Drone imagery or pre-processed data. To start, in the site creation page, either create a new site or within an existing site, chose the Virtual Model ...