How to link post blast project with pre blast project?
There are two ways to link the pre-blast with post-blast data.
A. Before uploading post-blast images
1. Before uploading post-blast data in the software, need to toggle on the post-blast Fragmentation and Muckpile AI tab.
2. Select the Pre-blast project from the drop-down menu.
B. After processing post-blast images
1. Select the Link the pre-blast project tab after selecting three dots.
2. After that, select the pre-blast project name to link with the post-blast project.
Related Articles
How to upload post blast - muckpile images in Strayos
Strayos has an automated muckpile profile reporting, cast analysis and fragmentation tool that uses machine learning processing to generate the results. Creation of site and project details are as usual but in order to process your muckpile images, ...Calculating Swell Factor for Complex Shots with Strayos
In situations where a swell factor needs to be calculated and either multiple shots or a complex geometry exists then users can use this tool to find relevant volumetric information. Once the bottom elevations of the shots are known, the boundaries ...Strayos Blast Reporting
The blast report within Strayos allows users to create an automated report from their Blast Design, which will include everything within each module of the D&B workflow. Users have the option to edit the terminology and values within each field to ...How to Upload Pre-processed Data
Possible Combinations of Preprocessed data: To create a 3D model, you will need a digital elevation model (DEM - DSM or DTM) and an orthophoto GeoTIFF file. The DEM and Orthophoto must be attached to a Coordinate Reference System (CRS) and in the ...Blast Report - FAQ
How can I change explosive amounts, caps and booster quantities on report? Any loading product information can be updated after the blast through the loading module under "Update actuals" for both bulk explosive products and caps/boosters/detonators. ...