Strayos Support

  • Total activity 147
  • Last activity
  • Member since
  • Following 0 users
  • Followed by 0 users
  • Votes 0
  • Subscriptions 73

Activity overview

Latest activity by Strayos Support
  • Strayos Support created an article,

    How the fragmentation AI works

    Obtaining rock contours Pipeline 1) Pre-processing Input is an orthographic RGB image with resolution . Since the input orthographic image could cover an area and such image could have size , to...

  • Strayos Support created an article,

    Muckpile Prediction

      Create a drill pattern design To make a muckpile prediction, you must first add drill holes to the project using the Drilling Design module.  You can create a new drill pattern or import a drill ...

  • Strayos Support created an article,

    Designing a presplit row

    This article will show you how to add a presplit row to the back of a shot design in Strayos.   Adding the drill holes 1) Design the body of the shot the same way you normally would   2) In the s...

  • Strayos Support created an article,

    3D Shot Volume Measurement

      Design the drill pattern Set up the drill pattern using your preferred method.  Note: Ensure subdrill and floor elevations are set correctly as shot volume will exclude subdrill You may need...

  • Strayos Support created an article,

    Floor Control Module

    Introduction The Floor Control module allows users to: measure how closely floors have been dug to design check which blasts / holes were drilled around any areas of concern identify the cause of ...

  • Strayos Support created an article,

    Fragmentation Prediction

    Overview Strayos provides you the most accurate fragmentation predictions possible by automatically calibrating them using previous blasts. The prediction models continually learn and improve as yo...

  • Strayos Support created an article,

    Understanding cut fill color visualization

    Strayos cut fill analysis tool allows you to add cut-off values for cut and fill visualization. It is the elevation difference between the surfaces being compared. The color corresponding to the c...

  • Strayos Support created an article,

    Prepare a GCP File for your site

    To upload a GCP rectified dataset, a GCP csv file needs to be uploaded along with the drone images. When you toggle Do you have GCP data, there is a tool to help you prepare the GCP File template, ...

  • Strayos Support created an article,

    Vibration/Airblast

    Vibration/Airblast Vibration/Airblast management The vibration/airblast management module is used for tracking and visualizing historical data, and using it to build continually improving predictio...

  • Strayos Support created an article,

    Timing Design

    Timing Design Non-electric Timing If you have non-electric in-hole detonators in the loading design, you will see the Non-electric Timing tool in the sidebar.   Creating a tie up plan To create a ...